Thank you for choosing the WDW microcomputer-controlled electronic universal testing machine, Our company is deeply grateful. Please read the instruction manual carefully and fully understand it before turning on the machine.And please take care of this machine and use it correctly, so that the machine will always maintain a high accuracy and a good running state.

CYWDW-50D is a new generation of microcomputer controlled electronic universal testing machine. It is mainly used to test the tensile, compression, bending, shearing, peeling, tearing and other mechanical properties of various metals, non-metals and composite materials. The system adopts microcomputer closed-loop control, has a wide and accurate loading speed and force measurement range, and has high precision and sensitivity for load and displacement measurement and control. This equipment is suitable for metal, adhesive, pipe, copper, aerospace, petrochemical, waterproof membrane, wire and cable, textile, fiber, rubber, ceramic, food, medical packaging, geotextile, film, wood, paper and other manufacturing industries As well as product quality supervision departments at all levels, it is also suitable for teaching demonstrations in colleges and universities. The main design of the testing machine has the characteristics of beautiful appearance, convenient operation, stable and reliable performance, no pollution, low noise and high efficiency. The design of the auxiliary equipment matches the host machine, the structure is wedge-shaped translational, manual rotation clamping, and the sample is

not subject to additional force. The clamping is convenient, reliable, and does not slip. 

The test machine adopts AC servo speed control system and motor with high speed control accuracy and stable performance as the driving system; specially designed synchronous tooth belt deceleration system and ball screw pair drive the moving beam of the test machine; Windows is the operating platform The control and data processing software based on database technology adopts virtual instrument technology to replace traditional digital tubes and oscilloscopes, and realizes the screen display of test force, test force peak value, beam displacement, sample deformation and test curve. All test operations are It can be done by mouse input on the computer screen, has a good man-machine interface, and is easy to operate; the dual-channel all-digital program-controlled amplifier inserted in the PC realizes the real physical zeroing, gain adjustment and test force The automatic gear shift, zero adjustment and calibration of the measurement, without any analog adjustment links, the control circuit is highly integrated, and mechanical adjustment devices such as

potentiometers are completely eliminated. The structure is simple and the

performance is reliable. The comprehensive application of the above technologies ensures that the machine can realize closed-loop control of parameters such as test force, specimen deformation and beam displacement, and can realize constant force, constant displacement, constant strain, constant velocity load cycle, constant velocity deformation cycle, etc. test. Users can use the PC expert system to independently set control modes such as constant stress, constant strain, and constant displacement, and smooth switching between various control modes. 

The program-controlled mode meets the requirements of the national standards GB/T228-2002 "Metal Material Tensile Test Method at Room Temperature" and GB/T7314-1987 "Metal Compression Test Method", achieving compliance with GB, ISO, JIS, ASTM, DIN and other standards Data processing, especially with good scalability, processing results can be stored on disk in the form of ASCII code. It provides convenience for post-processing of test data

such as reanalysis, database management and network transmission. Because the testing machine realizes the automatic control of the test process and the

information processing of the test results, the operator can conveniently and

autonomously set the test program control steps. During the tensile test, the tester can clearly observe the whole test process of low carbon steel and cast iron. 

Through repeated loading on different curve segments, from the force-displacement (deformation) curve, it is possible to visually verify Hooke's law and observe the phenomenon of cold work hardening. For materials without obvious physical yield phenomena, the hysteresis loop method or the stepwise approximation method can be used to determine the prescribed non-proportional extension strength. During the compression process, it is convenient to observe the compression yield phenomenon and strengthening phenomenon of low carbon steel, the compression failure process and fracture shape of cast iron. It can also detect the n value and r value of mechanical

materials.

Main specification

★, style: door type platform type

★, testing machine accuracy: 0.5 level

★, Maximum tensile and compression test force: 50KN; 5 tons

1. Test force measurement range: 0.4%-100%FS

2. Test force classification: you can choose to classify or not to classify

3. Test force measurement accuracy: better than ±0.5% of the indicated value;

4. Displacement resolution: 0.0001mm;

5. Accuracy of displacement measurement: ±0.5%;

6. Deformation measurement range: 0.2～100% FS;

7. Relative error of deformation indication: within ±0.50%;

8. Deformation resolution: 1/100000FS;

9. Force control rate adjustment range: 0.05～5%FS/S;

10. Relative error of force control rate: within ±1% of the set value;

11. Deformation rate adjustment range: 0.02～5%FS/S;

12. Relative error of deformation control rate: when the rate is less than 0.05% FS, it is

within ±2% of the set value;

When the rate is ≥0.05% FS, it is within ±0.5% of the set value;

13. Measuring range of beam speed: 0.05～500mm/min;

14. The relative error of beam speed: when the speed is less than 0.01 mm/min, within

±1.0% of the set value;

When the speed is ≥0.01 mm/min, within ±0.2% of the set value;

15. Constant force, constant deformation, constant displacement control range:

0.5%～100%FS;

16. Constant force, constant deformation and constant displacement control accuracy:

when the set value is ≥10% FS, within ±0.1% of the set value;

When the set value is less than 10% FS, within ±1% of the set value;

17. Stretching stroke: 0～700mm;

18. Compression stroke: 0～700mm;

19. The maximum stroke of the beam: 1200mm;

20. Test width: 400mm

21. Power supply: 220V, 50Hz; 0.75kW;

22. Host size: 720×520×1850mm;

23. Host weight: about 450Kg;

24. Testing machine executive standard: GB/T 16491-2008 "Electronic Universal Testing

Machine", GB/T 228-2010 "Metallic Material Room Temperature Tensile Test Method", GB/T7314-1987 "Metal Compression Test Method" 25. Appearance: should meet the requirements of GB/T2611

26. Complete set: in line with standard requirements

27. Protection function: the testing machine has overload protection function